Flic Twist: how the smart dial works, and what it teaches about interaction design
- Published
- Reading time
- 6 min
- Published by
- Alex

A dial for the smart home
Flic Twist is a wireless dial and push button from Stockholm-based Shortcut Labs. It talks to a Flic Hub over Bluetooth and lets you dim, select and trigger smart home actions without opening an app. Its real interest for designers is how much control it fits into one familiar gesture.
Flic Twist is a wireless smart home controller that combines a rotating dial with a push button. You turn it to dim lights or step through presets, press it to trigger actions, and push while turning to reach a second layer of controls. It is made by Shortcut Labs AB in Stockholm, needs a Flic Hub to work, and – through the hub – can control Matter devices and integrations such as Philips Hue and IKEA’s smart home system.
This article explains how the product works as of November 2026, based on Flic’s own documentation, and then looks at what its design can teach anyone who designs interfaces, physical or digital.
What is Flic Twist?
Flic Twist is a round, battery-powered dial that you can place almost anywhere: on a wall, a fridge, a desk or a bedside table. It has no screen and no voice assistant. Instead it relies on two physical gestures that most people understand without instructions: turning and pressing.
Flic’s user manual describes two triggers that the Twist adds to the Flic range:
- Twist – rotating the dial
- Push & Twist – pushing the dial in and rotating at the same time, which unlocks advanced modes
The centre also works as a push button, so you can trigger actions without turning at all.
How does Flic Twist work?
The Twist does not connect directly to your lights or speakers. It sends its input over Bluetooth to a Flic Hub (the Flic Hub LR or the smaller Flic Hub Mini), and the hub carries out the action. You set it up in the Flic app on iOS or Android: plug in the hub, add the hub in the app, then pair the Twist through the app’s setup guide. Flic’s manual warns against pairing it through the phone’s own Bluetooth settings.
What the Twist does is set per mode in the app. The manual lists four main modes:
| Mode | What it does |
|---|---|
| Smart Dimming | Adjusts brightness or volume while keeping the relative differences between devices, so a dimmed scene keeps its balance |
| Advanced Dimming | A dimming journey where you can change brightness, colour or saturation together and add triggers at points along the rotation |
| Scene Blender | Blends between up to four preset light scenes as you turn |
| Selector | Up to 12 positions, named like the hours on a clock, each set to activate or adjust something |
Does Flic Twist work with Matter and HomeKit?
Yes for Matter, through the hub. Flic announced in October 2024 that its hubs had been updated with Matter support, and its Matter page describes the Flic Hub LR and Flic Hub Mini as Matter controllers. That means the hub itself controls Matter devices, and the Twist works as its input. Flic markets the Twist as the world’s only rotating dial for Matter.
There are a few limits worth knowing before you buy:
- No direct HomeKit support. Flic states that the Twist will not work directly with Apple HomeKit, but it can control Matter-compatible devices, which covers many products sold for HomeKit.
- Limited bridging to other ecosystems. Because Flic runs its own Matter controller, Flic says compatibility with Apple Home or Google Home as controllers is limited.
- Thread needs a border router. Matter devices that use Thread need a separate Thread border router, such as a HomePod. Flic says Thread cannot be built into the hub.
- No volume over Matter. Flic notes that the Matter standard does not support volume control, so speakers cannot be controlled that way through Matter.
Outside Matter, Flic’s integrations page lists Twist support through a hub for, among others, Philips Hue, LIFX, Nanoleaf, IKEA Dirigera and Trådfri, IFTTT, Alexa, Chromecast, Eve and Bosch Smart Home. Integrations change over time, so check Flic’s integrations page for the device you want to control.
Batteries, mounting and practical details
| Flic Twist | |
|---|---|
| Power | Two replaceable AAA batteries, up to two years of use (shorter with heavy use) |
| Rechargeable batteries | Supported (rechargeable AAA) |
| Mounting | Built-in magnets, a reusable adhesive pad, or a screw wall mount |
| Connection | Bluetooth to a Flic Hub LR or Flic Hub Mini |
| Operating temperature | −10 °C to +40 °C |
| Water | Not waterproof |
| Warranty | 24 months on the hardware (batteries excluded) |
The adhesive pad can be washed with water and left to dry when it loses its grip, and Flic advises against sticking it to wallpaper. Source: Flic Twist user manual.
What Flic Twist teaches about interaction design
The Twist is a good case study for anyone who designs interfaces, because it solves a familiar problem – controlling many digital things – with very few physical means. Several lessons carry straight over to websites and apps.
Match the control to the kind of value
Brightness, colour temperature and volume are continuous ranges. A dial maps a range to a movement: turn further, get more. Compare that with a voice command (“a bit dimmer… no, a bit more”) or an app slider that takes four taps to reach. On screen, the same principle applies: use sliders for ranges, toggles for on and off, and a list for picking one option from many.
Borrow a mental model people already have
The Selector names its 12 positions after the hours of a clock. Nobody needs to learn that “3 o’clock” is a quarter turn. Building on models people already carry is one of the cheapest ways to make something feel obvious – we go deeper into this in mental models in web design.
Layer advanced features behind a simple default
Push & Twist doubles what the device can do without adding a single button. The trade-off is discoverability: nothing on the dial tells a guest that the second layer exists. That is acceptable only because the plain twist and press work on their own. Hidden gestures, keyboard shortcuts and long-press menus on screens follow the same rule: they are fine as accelerators, never as the only way to do something.
Put the control where the need arises
Magnets, adhesive and screws mean the dial can sit next to the sofa, on the fridge or by the bed. Good digital design does the same with actions: put the “add to basket” button next to the price, and the filter next to the list it filters.
Physical feedback beats confirmation dialogs
A dial gives you constant feedback: you feel the rotation and see the light change as you turn. Screens cannot offer touch, but they can respond instantly to every input, which is why fast, visible feedback matters so much for how a product feels. We write more about this in emotional design and customer experience.
Our work with Flic
We did not design the Flic Twist hardware. Our relationship with Flic is on the digital side: for more than three years we have worked with Flic’s team on their Shopify store, campaign and launch pages, the WordPress content site, loading speed and integrations. You can read about that work in the Flic case study, and about how we approach online shops in our e-commerce service.
Key insights
- 01
It needs a hub
Flic Twist connects over Bluetooth to a Flic Hub LR or Flic Hub Mini. The hub, not the dial, is what talks to lights, speakers and Matter devices.
- 02
Matter, but not HomeKit
Flic Hubs act as Matter controllers, so the Twist can control Matter devices. Flic states that the Twist cannot work directly with Apple HomeKit.
- 03
Rotation fits continuous values
Brightness, colour and volume are ranges, and a dial maps a range to a movement better than a tap, a voice command or a slider in an app.
- 04
Hidden power has a cost
Push-and-twist unlocks extra modes, but nothing on the device tells you it exists. Advanced gestures need a simple default that works without them.















